Interested in this report?

Published: 7 May 2015

This report is an Analog Circuit Analysis of the radio frequency (RF) transceiver, buck-boost converter and its low drop outs (LDO) regulators, XTAL 16 MHz driver, reference generators, and other control circuits that support the radio transceiver and DC-DC converter. The DA14580 die was fabricated using a seven metal layer interconnect process including one top aluminum (Al) metal redistribution layer (RDL), six copper (Cu) layers, tungsten (W) contacts, a single polysilicon layer, shallow trench isolation (STI), and likely nickel platinum silicided (NiPtSi) polysilicon gates and source/drain (S/D).

Report Description

This report is an Analog Circuit Analysis of the radio frequency (RF) transceiver, buck-boost converter and its low drop outs (LDO) regulators, XTAL 16 MHz driver, reference generators, and other control circuits that support the radio transceiver and DC-DC converter.

Recent OMR Reports

CAR-1801-901  |   Published: 15 August 2018
The following is a CircuitVision Analysis report on the Intel 29F01T2ANCTH2, 64-layer 3D NAND Flash memory (B16A die). The Intel 29F01T2ANCTH2 device was extracted from an Intel SC2KW512GBX1 solid state drive (SSD).
FAR-1807-802  |   Published: 15 August 2018
This report presents a Basic Functional Analysis of the MediaTek BM10610B die found inside the MediaTek MT2625DA package. The MediaTek MT2625DA package was extracted from the Gosuncn ME3616 NB-IoT module....
SCA-1807-805  |   Published: 14 August 2018
Shared Construction Analysis